Maintenance and handling of your UV lamps

Here are some common maintenance suggestions and recommended handling tips for your UV lamps:

• Store your ultraviolet lamps in a dry place with an ambient temperature without excessive heat or cold. Keep them properly identified and labelled.
• Do not touch the lamps with bare hands when handling them. We recommend using latex gloves as a usual norm.
• If you notice dirty on the bulb glass, clean it with isopropyl alcohol and a soft tissue before lighting.
• Check that the lamphead is clean and in good condition before changing the lamp, paying special attention to the reflectors. If you notice superficial dirt, clean it prior to install the new lamp.
• Always allow the lamp to cool properly once it have been turned off. Omitting this point will shorten your life substantially.
• Avoid frequent short duration ignitions, as they damage the tungsten electrodes by contaminating the inside of the bulb.
• Keep a maintenance routine checking the equipment and cleaning of the lamps and other components.
• If the lamp is too long, rotate its position from time to time. It will help to avoid a possible buckling of the bulb.

An ultraviolet system in good condition with optimal maintenance can substantially extend the life of your UV lamps.

For more information on the maintenance and handling of your UV lamps, contact us.